Ⅹ/Logo
[EXPERIMENTAL]
Development of idears for NB10 logo submissions
Some early drafts and tests https://tinyurl.com/nb10test
Sketches[edit | edit source]
Initial concept, momentary switch not shown, idea to use 4 alternating LEDs to represent 1010 binary version of "10". 3 peaked resistor as symbolism of bay bridge.
Full bridge rectifier of LEDs with speaker as DC load and AC input. By varying the frequency different tones/noise is generated. Image should be vertically flipped.
Positioning of components and traces to more visually illustrate a 10.
White board sketch of modular "pie".
Prototype[edit | edit source]
LiteON LTL911TGKS green LEDs soldered together in rectifier configuration with 8Ω dc speaker load and ~5v rms ac ~20hz-20khz.
Vector[edit | edit source]
Draft of a vector test, using white space "10" and roman numeral for ten.
Stickers (concept)[edit | edit source]
Sub X2[edit | edit source]
Take of a take of Jarrods (https://noisebridge.net/images/e/ed/NB10-X.svg)
Two color version with nb red for schematic
Reverse two color version, and rotated outter text, noisebridge.net could get flipped