Lxpk: Created page with "{{3dprinting}} == FLASHFORGE CREATOR DUAL EXTRUDER PRINTER == 300px bool '''currentlyOperational''' = true; string '''cloneOf''' = "a Maker..."

2020-04-15T07:29:10Z

Created page with "{{3dprinting}} == FLASHFORGE CREATOR DUAL EXTRUDER PRINTER == 300px bool '''currentlyOperational''' = true; string '''cloneOf''' = "a Maker..."

New page

{{3dprinting}}

== FLASHFORGE CREATOR DUAL EXTRUDER PRINTER ==

[[File:FlashForgeCreatorr.jpg|300px]]

bool '''currentlyOperational''' = true;

string '''cloneOf''' = "a MakerBot Replicator Dual Extruder";

==== Flashforge Docs ====
* this is the wood frame product, similar to the Creator Pro model made of plastic.
* [http://www.flashforge-usa.com/assets/manual/flashforge_creator_pro_user_guide_v01.20.2015.3.0.pdf?cd6e8a Flashforge Creator Pro manual]
* [http://goo.gl/3mwCkk Getting the Flashforge Creator printing]

=== Printing from your own laptop ===
# Software Installation
## Download and install [http://www.ftdichip.com/Drivers/VCP.htm FTDI Drivers].
## Download and install [http://replicat.org/download ReplicatorG].
# Software Configuration
## Open ReplicatorG.
## Choose the menu '''File > Open...''' and select the STL file you want to print (It will probably be in your downloads folder if you got it from a web site like Thingiverse.).
## Choose the menu '''Machine > Machine Type > The Replicator Dual'''.
## Choose the menu '''Machine > Connection (Serial port) > /dev/tty.usbmodem1411'''.
##
# Generate GCode from your STL file.
# Click Connect to device. (If you have trouble, see Connection Troubleshooting below.)

* Connection Troubleshooting
** Connection error: The serial port named '/dev/tty.usbmodem1411' could not be found.
*** It may not be turned on and plugged in.
* Printing Troubleshooting
** It stops printing midway through.
*** Are you browsing the Internet memes with Replicator in the background? It can't print very far in the background. Alt-tab/command-tab to bring ReplicatorG to foreground every time it stops and it will resume. This is one of the main reasons to start using the SD card to print: You can use your computer for other things without slowing down or stopping prints.

=== Printing from an SD card ===
# Put files ending in .gcode on an SD card
# Insert SD card into the side-facing slot on the front right side of the case.
# Press DOWN ARROW till you reach Print from SD card
# Press CENTER SELECT

=== Printing from the [[Threed]] printstation PC ===
A [[Threed]] printer computer station is connected to the printer.

Flashforge Creator Dual Extruder Printer - Revision history

Lxpk: Created page with "{{3dprinting}} == FLASHFORGE CREATOR DUAL EXTRUDER PRINTER == 300px bool '''currentlyOperational''' = true; string '''cloneOf''' = "a Maker..."