Noisebridge - User contributions [en]

Passport

2011-09-28T18:34:20Z

ZombieCraig: /* Promotional Graphics */ Added example HTML code

[[Image:passassembled08_thumb.jpg|thumb|right]]
= I created Hackerspace Passports to =
* help promote people visiting as many hackerspaces around the world as possible
* increase collaboration
* increase cross-polination so we can all learn from one another
* encourage all hackerspaces to support each other
* (And it's fun.)

These Hackerspace Passports look a lot like US Passports, but no fingerprints needed! And, rather than a requirement for passing borders, they are intended to encourage it!

If each hackerspace and hacker con makes their own stamp, then people can get their Hackerspace Passport stamped everywhere they go.

I am releasing the first 2600 of these at Chaos Communication Camp 2011, which seems appropriate to me, since the previous Camp (in 2007) was the birthplace of the new wave of hackerspaces.

I am bringing 3 stamps with me to Camp:
* Noisebridge
* Hardware Hacking Tent (which I'm helping organize)
* a stamp I made for CCCamp2011

[[Image:passassembled08_visa_thumb.jpg|thumb|right]]

The Hackerspace Passports cost me about €1 each, and that's what I'll be selling them for.

I hope that all hackerspaces and all hacker conferences will make their own stamps, so that hackers can travel the world and share their stories with one another by showing off the stamps in their passport.

== Stamp Dimensions ==
Each page of the Hackerspace Passport can accommodate 4 stamps of 41mm x 47mm, or 1 stamp up to 89mm x 118mm.

== Promotional Graphics ==

Below are some drafts for website badges to promote that your hackerspace has stamps to support these passports.

[[Image:Passport-badge-iron.png]]

[[Image:Passport-badge2.png]]

Source link: [[Media:Passport-badges.svg]]

Clicking on these badge buttons should link back to this wiki or to a custom page that your hackerspace uses to show off their stamps. Note: At this time these are not official buttons but just drafts. Button look subject to change. Check back often.

Sample HTML Code to cut and paste into your site:
<pre>
<a href=https://www.noisebridge.net/wiki/Passport>
<img src=https://www.noisebridge.net/images/1/11/Passport-badge-iron.png alt="Hackerspace Passports Accepted Here" title="Hackerspace Passports Accepted Here" border=0></a>
</pre>

== Download the artwork! ==
Thanks to [http://har.ms Matthew Borgatti] ([http://twitter.com/gianteye @gianteye]) who did all the illustration, graphic design, and proofing to bring this together. He also runs a store called [http://www.sleekanddestroy.com Sleek and Destroy] you might want to check out.

You can download the artwork for free (of course)! 
[[Media:hackerpass08.pdf]]

Here is a link to the edit-able source: 
[http://tiny.cc/passSRC http://tiny.cc/passSRC]

== Open Source Licensing ==
Released under a Creative Commons Attribution Share-Alike License [http://creativecommons.org/licenses/by-sa/3.0/ CC BY-SA].
[[Image:CC_BY_SA.jpg|thumb|right]]
 
 
 
 
 
 

== Photos ==
The Hackerspace Passports were a huge hit at CCCamp 2011 (and around the world). Hackerspaces (and people, and geek events) created stamps, and now people can travel the world of geeky happenings and stamp their passports.

Here's some [http://www.flickr.com/groups/1718510@N24/ photos]. 
(Feel free to add more.)

[[User:maltman23|Mitch]]

User:ZombieCraig

2011-09-28T12:36:54Z

ZombieCraig: Created page with '* Name: Craig Smith * Hackerspace: [http://www.hive13.org Hive13] * Email: Craig at Hive13'

* Name: Craig Smith
* Hackerspace: [http://www.hive13.org Hive13]
* Email: Craig at Hive13

Passport

2011-09-28T12:35:33Z

ZombieCraig: /* Promotional Graphics */ reminder note about draft quality

[[Image:passassembled08_thumb.jpg|thumb|right]]
= I created Hackerspace Passports to =
* help promote people visiting as many hackerspaces around the world as possible
* increase collaboration
* increase cross-polination so we can all learn from one another
* encourage all hackerspaces to support each other
* (And it's fun.)

These Hackerspace Passports look a lot like US Passports, but no fingerprints needed! And, rather than a requirement for passing borders, they are intended to encourage it!

If each hackerspace and hacker con makes their own stamp, then people can get their Hackerspace Passport stamped everywhere they go.

I am releasing the first 2600 of these at Chaos Communication Camp 2011, which seems appropriate to me, since the previous Camp (in 2007) was the birthplace of the new wave of hackerspaces.

I am bringing 3 stamps with me to Camp:
* Noisebridge
* Hardware Hacking Tent (which I'm helping organize)
* a stamp I made for CCCamp2011

[[Image:passassembled08_visa_thumb.jpg|thumb|right]]

The Hackerspace Passports cost me about €1 each, and that's what I'll be selling them for.

I hope that all hackerspaces and all hacker conferences will make their own stamps, so that hackers can travel the world and share their stories with one another by showing off the stamps in their passport.

== Stamp Dimensions ==
Each page of the Hackerspace Passport can accommodate 4 stamps of 41mm x 47mm, or 1 stamp up to 89mm x 118mm.

== Promotional Graphics ==

Below are some drafts for website badges to promote that your hackerspace has stamps to support these passports.

[[Image:Passport-badge-iron.png]]

[[Image:Passport-badge2.png]]

Source link: [[Media:Passport-badges.svg]]

Clicking on these badge buttons should like back to this wiki or to a custom page that your hackerspace uses to show off their stamps. Note: At this time these are not official buttons but just drafts. Button look subject to change. Check back often.

== Download the artwork! ==
Thanks to [http://har.ms Matthew Borgatti] ([http://twitter.com/gianteye @gianteye]) who did all the illustration, graphic design, and proofing to bring this together. He also runs a store called [http://www.sleekanddestroy.com Sleek and Destroy] you might want to check out.

You can download the artwork for free (of course)! 
[[Media:hackerpass08.pdf]]

Here is a link to the edit-able source: 
[http://tiny.cc/passSRC http://tiny.cc/passSRC]

== Open Source Licensing ==
Released under a Creative Commons Attribution Share-Alike License [http://creativecommons.org/licenses/by-sa/3.0/ CC BY-SA].
[[Image:CC_BY_SA.jpg|thumb|right]]
 
 
 
 
 
 

== Photos ==
The Hackerspace Passports were a huge hit at CCCamp 2011 (and around the world). Hackerspaces (and people, and geek events) created stamps, and now people can travel the world of geeky happenings and stamp their passports.

Here's some [http://www.flickr.com/groups/1718510@N24/ photos]. 
(Feel free to add more.)

[[User:maltman23|Mitch]]

Passport

2011-09-28T12:34:24Z

ZombieCraig: /* Promotional Graphics */ Initial drafts

[[Image:passassembled08_thumb.jpg|thumb|right]]
= I created Hackerspace Passports to =
* help promote people visiting as many hackerspaces around the world as possible
* increase collaboration
* increase cross-polination so we can all learn from one another
* encourage all hackerspaces to support each other
* (And it's fun.)

These Hackerspace Passports look a lot like US Passports, but no fingerprints needed! And, rather than a requirement for passing borders, they are intended to encourage it!

If each hackerspace and hacker con makes their own stamp, then people can get their Hackerspace Passport stamped everywhere they go.

I am releasing the first 2600 of these at Chaos Communication Camp 2011, which seems appropriate to me, since the previous Camp (in 2007) was the birthplace of the new wave of hackerspaces.

I am bringing 3 stamps with me to Camp:
* Noisebridge
* Hardware Hacking Tent (which I'm helping organize)
* a stamp I made for CCCamp2011

[[Image:passassembled08_visa_thumb.jpg|thumb|right]]

The Hackerspace Passports cost me about €1 each, and that's what I'll be selling them for.

I hope that all hackerspaces and all hacker conferences will make their own stamps, so that hackers can travel the world and share their stories with one another by showing off the stamps in their passport.

== Stamp Dimensions ==
Each page of the Hackerspace Passport can accommodate 4 stamps of 41mm x 47mm, or 1 stamp up to 89mm x 118mm.

== Promotional Graphics ==

Below are some drafts for website badges to promote that your hackerspace has stamps to support these passports.

[[Image:Passport-badge-iron.png]]

[[Image:Passport-badge2.png]]

Source link: [[Media:Passport-badges.svg]]

Clicking on these badge buttons should like back to this wiki or to a custom page that your hackerspace uses to show off their stamps.

== Download the artwork! ==
Thanks to [http://har.ms Matthew Borgatti] ([http://twitter.com/gianteye @gianteye]) who did all the illustration, graphic design, and proofing to bring this together. He also runs a store called [http://www.sleekanddestroy.com Sleek and Destroy] you might want to check out.

You can download the artwork for free (of course)! 
[[Media:hackerpass08.pdf]]

Here is a link to the edit-able source: 
[http://tiny.cc/passSRC http://tiny.cc/passSRC]

== Open Source Licensing ==
Released under a Creative Commons Attribution Share-Alike License [http://creativecommons.org/licenses/by-sa/3.0/ CC BY-SA].
[[Image:CC_BY_SA.jpg|thumb|right]]
 
 
 
 
 
 

== Photos ==
The Hackerspace Passports were a huge hit at CCCamp 2011 (and around the world). Hackerspaces (and people, and geek events) created stamps, and now people can travel the world of geeky happenings and stamp their passports.

Here's some [http://www.flickr.com/groups/1718510@N24/ photos]. 
(Feel free to add more.)

[[User:maltman23|Mitch]]

File:Passport-badge2.png

2011-09-28T12:32:21Z

ZombieCraig: Passport website badge (draft)

Passport website badge (draft)

File:Passport-badge-iron.png

2011-09-28T12:30:48Z

ZombieCraig: Passport badge iron version (draft)

Passport badge iron version (draft)

File:Passport-badges.svg

2011-09-28T12:28:37Z

ZombieCraig: Two sample website badges to promote the support of the Hackerspace passports. This is the SVG 'source' file

Two sample website badges to promote the support of the Hackerspace passports. This is the SVG 'source' file