Noisebridge - User contributions [en]

Chuck

2016-12-04T06:02:17Z

C0DE: #B0B

Arduino sketch code for RFID reader and 4x4 keypad matrix.

<pre>
/**************************************************************************/
/*!
@file readMifare.pde
@author Adafruit Industries
@license BSD (see license.txt)

This example will wait for any ISO14443A card or tag, and
depending on the size of the UID will attempt to read from it.

If the card has a 4-byte UID it is probably a Mifare
Classic card, and the following steps are taken:

- Authenticate block 4 (the first block of Sector 1) using
the default KEYA of 0XFF 0XFF 0XFF 0XFF 0XFF 0XFF
- If authentication succeeds, we can then read any of the
4 blocks in that sector (though only block 4 is read here)

If the card has a 7-byte UID it is probably a Mifare
Ultralight card, and the 4 byte pages can be read directly.
Page 4 is read by default since this is the first 'general-
purpose' page on the tags.

This is an example sketch for the Adafruit PN532 NFC/RFID breakout boards
This library works with the Adafruit NFC breakout
----> https://www.adafruit.com/products/364

Check out the links above for our tutorials and wiring diagrams
These chips use SPI or I2C to communicate.

Adafruit invests time and resources providing this open source code,
please support Adafruit and open-source hardware by purchasing
products from Adafruit!

*/
/**************************************************************************/
#include <Wire.h>
#include <SPI.h>
#include <Adafruit_PN532.h>
#include <Keypad.h>

// If using the breakout with SPI, define the pins for SPI communication.
#define PN532_SCK (2)
#define PN532_MOSI (3)
#define PN532_SS (4)
#define PN532_MISO (5)

// If using the breakout or shield with I2C, define just the pins connected
// to the IRQ and reset lines. Use the values below (2, 3) for the shield!
#define PN532_IRQ (2)
#define PN532_RESET (3) // Not connected by default on the NFC Shield

// Uncomment just _one_ line below depending on how your breakout or shield
// is connected to the Arduino:

// Use this line for a breakout with a software SPI connection (recommended):
//Adafruit_PN532 nfc(PN532_SCK, PN532_MISO, PN532_MOSI, PN532_SS);

// Use this line for a breakout with a hardware SPI connection. Note that
// the PN532 SCK, MOSI, and MISO pins need to be connected to the Arduino's
// hardware SPI SCK, MOSI, and MISO pins. On an Arduino Uno these are
// SCK = 13, MOSI = 11, MISO = 12. The SS line can be any digital IO pin.
//Adafruit_PN532 nfc(PN532_SS);

// Or use this line for a breakout or shield with an I2C connection:
Adafruit_PN532 nfc(PN532_IRQ, PN532_RESET);

const byte ROWS = 4; //four rows
const byte COLS = 4; //three columns
char keys[ROWS][COLS] = {
{'1','2','3','@'},
{'4','5','6','P'},
{'7','8','9','<'},
{'R','0','D','E'}
};
byte rowPins[ROWS] = {9, 8, 7, 6}; //connect to the row pinouts of the keypad
byte colPins[COLS] = {13, 12, 11, 10}; //connect to the column pinouts of the keypad

Keypad keypad = Keypad( makeKeymap(keys), rowPins, colPins, ROWS, COLS );

void setup(void) {
Serial.begin(115200);
Serial.println("Hello!");

nfc.begin();

uint32_t versiondata = nfc.getFirmwareVersion();
if (! versiondata) {
Serial.print("Didn't find PN53x board");
while (1); // halt
}
// Got ok data, print it out!
Serial.print("Found chip PN5"); Serial.println((versiondata>>24) & 0xFF, HEX);
Serial.print("Firmware ver. "); Serial.print((versiondata>>16) & 0xFF, DEC);
Serial.print('.'); Serial.println((versiondata>>8) & 0xFF, DEC);

// configure board to read RFID tags
nfc.SAMConfig();

Serial.println("Waiting for an ISO14443A Card ...");
}

void loop(void) {
uint8_t i = 0;
for (i; i < 100; i++) {
// Check Keypad
char key = keypad.getKey();

if (key){
Serial.println(key);
i = 0;
}
delay(10);
}

uint8_t success;
uint8_t uid[] = { 0, 0, 0, 0, 0, 0, 0 }; // Buffer to store the returned UID
uint8_t uidLength; // Length of the UID (4 or 7 bytes depending on ISO14443A card type)

// Wait for an ISO14443A type cards (Mifare, etc.). When one is found
// 'uid' will be populated with the UID, and uidLength will indicate
// if the uid is 4 bytes (Mifare Classic) or 7 bytes (Mifare Ultralight)
success = nfc.readPassiveTargetID(PN532_MIFARE_ISO14443A, uid, &uidLength, 100);

if (success) {
// Display some basic information about the card
Serial.println("Found an ISO14443A card");
Serial.print(" UID Length: ");Serial.print(uidLength, DEC);Serial.println(" bytes");
Serial.print(" UID Value: ");
nfc.PrintHex(uid, uidLength);
Serial.println("");

if (uidLength == 4)
{
// We probably have a Mifare Classic card ...
Serial.println("Seems to be a Mifare Classic card (4 byte UID)");

// Now we need to try to authenticate it for read/write access
// Try with the factory default KeyA: 0xFF 0xFF 0xFF 0xFF 0xFF 0xFF
Serial.println("Trying to authenticate block 4 with default KEYA value");
uint8_t keya[6] = { 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF };

// Start with block 4 (the first block of sector 1) since sector 0
// contains the manufacturer data and it's probably better just
// to leave it alone unless you know what you're doing
success = nfc.mifareclassic_AuthenticateBlock(uid, uidLength, 4, 0, keya);

if (success)
{
Serial.println("Sector 1 (Blocks 4..7) has been authenticated");
uint8_t data[16];

// If you want to write something to block 4 to test with, uncomment
// the following line and this text should be read back in a minute
//memcpy(data, (const uint8_t[]){ 'a', 'd', 'a', 'f', 'r', 'u', 'i', 't', '.', 'c', 'o', 'm', 0, 0, 0, 0 }, sizeof data);
// success = nfc.mifareclassic_WriteDataBlock (4, data);

// Try to read the contents of block 4
success = nfc.mifareclassic_ReadDataBlock(4, data);

if (success)
{
// Data seems to have been read ... spit it out
Serial.println("Reading Block 4:");
nfc.PrintHexChar(data, 16);
Serial.println("");

// Wait a bit before reading the card again
delay(1000);
}
else
{
Serial.println("Ooops ... unable to read the requested block. Try another key?");
}
}
else
{
Serial.println("Ooops ... authentication failed: Try another key?");
}
}

if (uidLength == 7)
{
// We probably have a Mifare Ultralight card ...
Serial.println("Seems to be a Mifare Ultralight tag (7 byte UID)");

// Try to read the first general-purpose user page (#4)
Serial.println("Reading page 4");
uint8_t data[32];
success = nfc.mifareultralight_ReadPage (4, data);
if (success)
{
// Data seems to have been read ... spit it out
nfc.PrintHexChar(data, 4);
Serial.println("");

// Wait a bit before reading the card again
delay(1000);
}
else
{
Serial.println("Ooops ... unable to read the requested page!?");
}
}
}
}
</pre>

ESP8266/Py

2016-11-18T00:42:52Z

C0DE:

microPython on ESP8266

<pre>
>>> import machine
>>> led = machine.Pin(2, machine.Pin.OUT)
>>> led.high()
>>> led.low()
>>> from time import sleep
>>> def blink():
... led.low()
... sleep(0.5)
... led.high()
...
>>> blink()
>>> def wink():
... led.low()
... sleep(0.1)
... led.high()
... sleep(0.2)
... led.low()
... sleep(0.1)
... led.high()
...
>>> wink()
</pre>

<pre>
>>> d0 = machine.Pin(4, machine.Pin.IN, machine.Pin.PULL_UP)
>>> d1 = machine.Pin(5, machine.Pin.IN, machine.Pin.PULL_UP)
>>> d0.value()
>>>
>>> def callback(p):
... print(p, p.value())
...
>>> from machine import Pin
>>> d0.irq(trigger=Pin.IRQ_FALLING | Pin.IRQ_RISING, handler=callback)
>>> d1.irq(trigger=Pin.IRQ_FALLING | Pin.IRQ_RISING, handler=callback)
</pre>

<pre>
>>> import machine
>>> from machine import Pin
>>> import utime
>>> def callback(p):
... print(utime.ticks_us())
...
>>> d0 = machine.Pin(4, machine.Pin.IN)
>>> d0.irq(trigger=Pin.IRQ_FALLING, handler=callback)
<IRQ>
>>>

'SPACE'
>>> 161328207
161328513
161328708
161328900
161405882
161406119
161406266
161406458
161406648
161406845
161408507
161408654
161408849
161409041
161409239
161409433

'SPACE'
165145125
165145405
165145596
165145797
165145992
165211956
165212194
165212385
165212586
165212782
165212928
165214540
165214737
165214934
165215129
165215276
165215469

'SPACE'
167842588
167842838
167843033
167843180
167843373
167920437
167920681
167920877
167921023
167921216
167921407
167923024
167923219
167923370
167923581
167923772
167923969
>>>
</pre>

<pre>
>>> import machine
>>> from machine import Pin
>>> import utime
>>> def callback(p):
... print(utime.ticks_us(), p.value(), p)
...
>>> d0 = machine.Pin(4, machine.Pin.IN)
>>> d1 = machine.Pin(5, machine.Pin.IN)
>>> d0.irq(trigger=Pin.IRQ_FALLING, handler=callback)
<IRQ>
>>> d1.irq(trigger=Pin.IRQ_FALLING | Pin.IRQ_RISING, handler=callback)
<IRQ>
[SPACE]
>>> 210770016 1 Pin(5)
210770569 0 Pin(4)
210770865 1 Pin(5)
210771213 1 Pin(4)
210771514 1 Pin(5)
210847670 0 Pin(5)
210848033 1 Pin(4)
210848336 1 Pin(4)
210848682 1 Pin(5)
210848986 1 Pin(4)
210850323 1 Pin(5)
210850627 1 Pin(4)
210850921 0 Pin(5)
210851268 0 Pin(4)
210852497 1 Pin(5)

[SPACE]
214292169 0 Pin(5)
214292636 1 Pin(4)
214292932 1 Pin(5)
214293280 0 Pin(4)
214293580 1 Pin(5)
214402831 0 Pin(5)
214403247 0 Pin(4)
214403540 1 Pin(5)
214403890 0 Pin(4)
214405434 1 Pin(5)
214405740 0 Pin(4)
214406038 0 Pin(5)
214406336 0 Pin(4)
214406678 1 Pin(5)

[Caps]
>>> 223902923 1 Pin(5)
223903519 0 Pin(4)`
223903810 1 Pin(5)
223904113 1 Pin(4)
223904456 1 Pin(5)
223964179 0 Pin(5)
223964508 0 Pin(4)
223964806 0 Pin(4)
223965101 1 Pin(5)
223965451 1 Pin(4)
223966912 0 Pin(5)
223967413 0 Pin(4)
223967746 1 Pin(5)
223968047 0 Pin(4)
223968997 1 Pin(5)

[U]
>>> 231044948 1 Pin(5)
231045553 0 Pin(4)
231045848 1 Pin(5)
231046203 1 Pin(4)
231133566 0 Pin(5)
231133897 1 Pin(4)
231134194 0 Pin(4)
231134492 1 Pin(5)
231134842 1 Pin(4)
231136321 1 Pin(5)
231136711 0 Pin(4)
231137006 1 Pin(5)
231137305 0 Pin(4)
231138390 1 Pin(5)

[U]
>>> 232928590 1 Pin(5)
232929128 1 Pin(4)
232929436 1 Pin(5)
232929735 1 Pin(4)
232930084 1 Pin(5)
233011829 0 Pin(5)
233012233 1 Pin(4)
233012527 1 Pin(5)
233012829 0 Pin(4)
233014394 0 Pin(5)
233014699 0 Pin(4)
233014994 0 Pin(5)
233015294 0 Pin(4)
233015587 1 Pin(5)

[U]
>>> 234233385 1 Pin(5)
234233821 0 Pin(4)
234234119 1 Pin(5)
234234418 0 Pin(4)
234234713 1 Pin(5)
234311186 0 Pin(5)
234311583 0 Pin(4)
234311878 1 Pin(5)
234312179 0 Pin(4)
234313706 0 Pin(5)
234314064 0 Pin(4)
234314362 1 Pin(5)
234314665 0 Pin(4)
234314959 1 Pin(5)

</pre>

ESP8266/Py

2016-11-18T00:31:03Z

C0DE: SPACE twidle'n

ESP8266/Py

2016-11-18T00:00:23Z

C0DE: re'member IRQ's? YA! i memberrrrrrrr #0DD ☀

ESP8266/Py

2016-11-17T22:56:47Z

C0DE: blink/wink #0DD ☀

microPython on ESP8266

<pre>
>>> from time import sleep
>>> def blink():
... led.low()
... sleep(0.5)
... led.high()
...

>>> def wink():
... led.low()
... sleep(0.1)
... led.high()
... sleep(0.2)
... led.low()
... sleep(0.1)
... led.high()
...
>>> wink()

>>> d1.irq(trigger=Pin.IRQ_FALLING | Pin.IRQ_RISING, handler=callback)
<IRQ>
</pre>

Americium

2016-11-16T00:16:23Z

C0DE: Americium & smoke detectors & boy scouts #D70 肀

Am
[[File:Americium-2411.jpg|1000px]]

*https://en.wikipedia.org/wiki/Americium
*http://arstechnica.com/science/2016/11/this-fall-the-radioactive-boy-scout-died-at-age-39/
*http://web.archive.org/web/20080822022316/http://seattletimes.nwsource.com/html/nationworld/2003821040_radiate04.html
*http://letsmakerobots.com/node/22103
*http://www.chemistrylearner.com/americium-241.html
*http://large.stanford.edu/courses/2011/ph241/eason1/

[[File:F1big.jpg|1000px]]

肀

File:F1big.jpg

2016-11-16T00:15:06Z

C0DE:

File:Americium-2411.jpg

2016-11-16T00:12:03Z

C0DE:

Arch

2016-11-13T18:07:21Z

C0DE: /* Configure It */ 1080p HD #EEE 岸

Arch is awesome you should try it, here's how...
 
== Try It ==

Download it: https://www.archlinux.org/download/ try teh torrent, it's hella well seeded.

Make a key
<pre>[green@01h arch]$ dd bs=4M if=archlinux-2016.11.01-dual.iso of=/dev/sdh status=progress && sync</pre>

Boot from iso, either on compatible hardware, or as a VirtualBox.

Congratulations, you're now running Arch.

== Install It ==

https://wiki.archlinux.org/index.php/Installation_Guide

#010 now it be green ?

I'm a repliCAN!

as in i can & will replicate

"when in doubt, reboot"

file got owned by root, chown it back

started vm with archlinux iso as optical

boot into Arch x64

<pre>
root@archiso ~ # timedatectl set-ntp true
root@archiso ~ # fdisk /dev/sda
n (use all defaults)
a (toggle bootable flag to enabled)
w (writes changes and exits
root@archis ~ # mkfs.ext4 /dev/sda1
root@archis ~ # mount /dev/sda1 /mnt
root@archis ~ # pacstrap /mnt base
root@archis ~ # genfstab -U /mnt >> /mnt/etc/fstab
root@archis ~ # arch-chroot /mnt

chroot # ln -s /usr/share/zoneinfo/America/Los_Angeles /etc/localtime
chroot # hwclock --systohc
chroot # nano /etc/locale.gen (uncomment en_US.UTF-8 and ISO)
chroot # locale-gen
chroot # echo LANG=en_US.UTF-8 > /etc/locale.conf
chroot # echo mousepad-aqua > /etc/hostname
chroot # passwd
aqua
chroot # pacman -S grub
chroot # grub-install --target=i386-pc /dev/sda
chroot # grub-mkconfig -o /boot/grub/grub.cfg
chroot # pacman -S intel-ucode
chroot # grub-mkconfig -o /boot/grub/grub.cfg
chroot # exit

[remove install media]

root@archis ~ # reboot

login as root

[root@localhost ~]# ip link (note ethernet name)
[root@localhost ~]# nano /etc/netctl/ethernet-dhcp
Description='DHCP connection'
Interface=enp0s3
Connection=ethernet
IP=dhcp
[root@localhost ~]# netctl start ethernet-dhcp
[root@localhost ~]# netctl enable ethernet-dhcp
[root@localhost ~]# pacman -S sudo
[root@localhost ~]# visudo (enable wheel group w/password save == esc :x)
[root@localhost ~]# useradd -m -G wheel -s /bin/bash h4x0r
[root@localhost ~]# passwd h4x0r (guest)
[root@localhost ~]# pacman -Syyu (sync databases)
</pre>

== Configure It ==
=== SSH ===
<pre>
# pacman -S openssh
# systemctl start sshd
# ststemctl enable sshd
</pre>

=== LXDE ===
<pre>
# pacman -S xorg xorg-drivers xorg-xinit lxde
# echo "exec startlxde" > ~/.xinitrc
# startx
</pre>

=== Resolution ===
<pre>
cvt 1920 1080
# 1920x1080 59.96 Hz (CVT 2.07M9) hsync: 67.16 kHz; pclk: 173.00 MHz
Modeline "1920x1080_60.00" 173.00 1920 2048 2248 2576 1080 1083 1088 1120 -hsync +vsync
xrandr --newmode "1920x1080_60.00" 173.00 1920 2048 2248 2576 1080 1083 1088 1120 -hsync +vsync
xrandr --addmode VGA1 1920x1080_60.00
<pre>

=== Misc ===
<pre>
# pacman -S virtualbox python mosquitto zip unzip tigervnc firefox chromium
libgl (1?)
virtualbox (2)
libx264 (1)
ttf-font (1)

# pacman -S noto-fonts-cjk noto-fonts-emoji
# pacman -S fossil git svn

</pre>

Talk:Noisebridge

2016-11-12T06:25:10Z

C0DE: u know what time it is? #00E

[[Trump_Preparedness:_Digital_Security_101|Trump 101]]
 
[[Arch|A]]
 
Can a section be added to the front page that shows active projects and new wiki entries being developed? Perhaps based on a category tag?


== <h2>more stuffs</h2> ==
*Make circuit boards [[PCB_Etching_Tutorial]]
*DefCon group [[DC415]]
*Router hacking [[WRT]]
*Basic use of [[NTP]]
*Flexible etching
**http://www.insulectro.com/content_media/file/Dupont_FRclad_H-73233.pdf
**https://www.noisebridge.net/pipermail/noisebridge-discuss/2016-August/048114.html
**http://imgur.com/gallery/TbzsP
**https://www.adafruit.com/products/1894
**http://www.ebay.com/sch/items/?_nkw=pyralux&_sacat=&_ex_kw=&_mPrRngCbx=1&_udlo=&_udhi=&_sop=12&_fpos=&_fspt=1&_sadis=&LH_CAds=&rmvSB=true
*Kali linux (live usb)
**http://docs.kali.org/downloading/kali-linux-live-usb-install
**http://docs.kali.org/downloading/kali-linux-live-usb-persistence

== How a'boot some 5MoF? ==

[[User:H4X0R|空]] ([[User talk:H4X0R|talk]]) 18:10, 8 September 2016 (UTC)

[[User:H4X0R|空]] ([[User talk:H4X0R|talk]]) 02:19, 3 October 2016 (UTC)

[[User:Thex|thex]] ([[User talk:Thex|talk]]) 17:03, 11 October 2016 (UTC)

<center>☁</center>

[[User:C0DE|C0DE]] ([[User talk:C0DE|talk]]) 22:41, 9 November 2016 (UTC)

 
<center>時</center>

Arch

2016-11-12T06:22:37Z

C0DE: 時 you too can haz keys #E0E

Arch is awesome you should try it, here's how...
 
== Try It ==

Download it: https://www.archlinux.org/download/ try teh torrent, it's hella well seeded.

Make a key
<pre>[green@01h arch]$ dd bs=4M if=archlinux-2016.11.01-dual.iso of=/dev/sdh status=progress && sync</pre>

Boot from iso, either on compatible hardware, or as a VirtualBox.

Congratulations, you're now running Arch.

== Install It ==

https://wiki.archlinux.org/index.php/Installation_Guide

#010 now it be green ?

I'm a repliCAN!

as in i can & will replicate

"when in doubt, reboot"

file got owned by root, chown it back

started vm with archlinux iso as optical

boot into Arch x64

<pre>
root@archiso ~ # timedatectl set-ntp true
root@archiso ~ # fdisk /dev/sda
n (use all defaults)
a (toggle bootable flag to enabled)
w (writes changes and exits
root@archis ~ # mkfs.ext4 /dev/sda1
root@archis ~ # mount /dev/sda1 /mnt
root@archis ~ # pacstrap /mnt base
root@archis ~ # genfstab -U /mnt >> /mnt/etc/fstab
root@archis ~ # arch-chroot /mnt

chroot # ln -s /usr/share/zoneinfo/America/Los_Angeles /etc/localtime
chroot # hwclock --systohc
chroot # nano /etc/locale.gen (uncomment en_US.UTF-8 and ISO)
chroot # locale-gen
chroot # echo LANG=en_US.UTF-8 > /etc/locale.conf
chroot # echo mousepad-aqua > /etc/hostname
chroot # passwd
aqua
chroot # pacman -S grub
chroot # grub-install --target=i386-pc /dev/sda
chroot # grub-mkconfig -o /boot/grub/grub.cfg
chroot # pacman -S intel-ucode
chroot # grub-mkconfig -o /boot/grub/grub.cfg
chroot # exit

[remove install media]

root@archis ~ # reboot

login as root

[root@localhost ~]# ip link (note ethernet name)
[root@localhost ~]# nano /etc/netctl/ethernet-dhcp
Description='DHCP connection'
Interface=enp0s3
Connection=ethernet
IP=dhcp
[root@localhost ~]# netctl start ethernet-dhcp
[root@localhost ~]# netctl enable ethernet-dhcp
[root@localhost ~]# pacman -S sudo
[root@localhost ~]# visudo (enable wheel group w/password save == esc :x)
[root@localhost ~]# useradd -m -G wheel -s /bin/bash h4x0r
[root@localhost ~]# passwd h4x0r (guest)
[root@localhost ~]# pacman -Syyu (sync databases)
</pre>

== Configure It ==
<pre>
# pacman -S openssh
# systemctl start sshd
# ststemctl enable sshd
# pacman -S xorg xorg-drivers xorg-xinit lxde
# echo "exec startlxde" > ~/.xinitrc
# startx

misc...
# pacman -S virtualbox python mosquitto zip unzip tigervnc firefox chromium
libgl (1?)
virtualbox (2)
libx264 (1)
ttf-font (1)

# pacman -S noto-fonts-cjk noto-fonts-emoji
# pacman -S fossil git svn

</pre>

Arch

2016-11-11T00:32:46Z

C0DE: /* Configure It */

Arch is awesome you should try it, here's how...

== Try It ==

Download it: https://www.archlinux.org/download/ try teh torrent, it's hella well seeded.

Boot from iso, either on compatible hardware, or as a VirtualBox.

Congratulations, you're now running Arch.

== Install It ==

https://wiki.archlinux.org/index.php/Installation_Guide

#010 now it be green ?

I'm a repliCAN!

as in i can & will replicate

"when in doubt, reboot"

file got owned by root, chown it back

started vm with archlinux iso as optical

boot into Arch x64

<pre>
root@archiso ~ # timedatectl set-ntp true
root@archiso ~ # fdisk /dev/sda
n (use all defaults)
a (toggle bootable flag to enabled)
w (writes changes and exits
root@archis ~ # mkfs.ext4 /dev/sda1
root@archis ~ # mount /dev/sda1 /mnt
root@archis ~ # pacstrap /mnt base
root@archis ~ # genfstab -U /mnt >> /mnt/etc/fstab
root@archis ~ # arch-chroot /mnt

chroot # ln -s /usr/share/zoneinfo/America/Los_Angeles /etc/localtime
chroot # hwclock --systohc
chroot # nano /etc/locale.gen (uncomment en_US.UTF-8 and ISO)
chroot # locale-gen
chroot # echo LANG=en_US.UTF-8 > /etc/locale.conf
chroot # echo mousepad-aqua > /etc/hostname
chroot # passwd
aqua
chroot # pacman -S grub
chroot # grub-install --target=i386-pc /dev/sda
chroot # grub-mkconfig -o /boot/grub/grub.cfg
chroot # pacman -S intel-ucode
chroot # grub-mkconfig -o /boot/grub/grub.cfg
chroot # exit

[remove install media]

root@archis ~ # reboot

login as root

[root@localhost ~]# ip link (note ethernet name)
[root@localhost ~]# nano /etc/netctl/ethernet-dhcp
Description='DHCP connection'
Interface=enp0s3
Connection=ethernet
IP=dhcp
[root@localhost ~]# netctl start ethernet-dhcp
[root@localhost ~]# netctl enable ethernet-dhcp
[root@localhost ~]# pacman -S sudo
[root@localhost ~]# visudo (enable wheel group w/password save == esc :x)
[root@localhost ~]# useradd -m -G wheel -s /bin/bash h4x0r
[root@localhost ~]# passwd h4x0r (guest)
[root@localhost ~]# pacman -Syyu (sync databases)
</pre>

== Configure It ==
<pre>
# pacman -S openssh
# systemctl start sshd
# ststemctl enable sshd
# pacman -S xorg xorg-drivers xorg-xinit lxde
# echo "exec startlxde" > ~/.xinitrc
# startx

misc...
# pacman -S virtualbox python mosquitto zip unzip tigervnc firefox chromium
libgl (1?)
virtualbox (2)
libx264 (1)
ttf-font (1)

# pacman -S noto-fonts-cjk noto-fonts-emoji
# pacman -S fossil git svn

</pre>

Talk:Noisebridge

2016-11-11T00:30:14Z

C0DE: ☁ #0EE

Arch

2016-11-10T18:47:42Z

C0DE: /* Configure It */

Arch is awesome you should try it, here's how...

== Try It ==

Download it: https://www.archlinux.org/download/ try teh torrent, it's hella well seeded.

Boot from iso, either on compatible hardware, or as a VirtualBox.

Congratulations, you're now running Arch.

== Install It ==

https://wiki.archlinux.org/index.php/Installation_Guide

#010 now it be green ?

I'm a repliCAN!

as in i can & will replicate

"when in doubt, reboot"

file got owned by root, chown it back

started vm with archlinux iso as optical

boot into Arch x64

<pre>
root@archiso ~ # timedatectl set-ntp true
root@archiso ~ # fdisk /dev/sda
n (use all defaults)
a (toggle bootable flag to enabled)
w (writes changes and exits
root@archis ~ # mkfs.ext4 /dev/sda1
root@archis ~ # mount /dev/sda1 /mnt
root@archis ~ # pacstrap /mnt base
root@archis ~ # genfstab -U /mnt >> /mnt/etc/fstab
root@archis ~ # arch-chroot /mnt

chroot # ln -s /usr/share/zoneinfo/America/Los_Angeles /etc/localtime
chroot # hwclock --systohc
chroot # nano /etc/locale.gen (uncomment en_US.UTF-8 and ISO)
chroot # locale-gen
chroot # echo LANG=en_US.UTF-8 > /etc/locale.conf
chroot # echo mousepad-aqua > /etc/hostname
chroot # passwd
aqua
chroot # pacman -S grub
chroot # grub-install --target=i386-pc /dev/sda
chroot # grub-mkconfig -o /boot/grub/grub.cfg
chroot # pacman -S intel-ucode
chroot # grub-mkconfig -o /boot/grub/grub.cfg
chroot # exit

[remove install media]

root@archis ~ # reboot

login as root

[root@localhost ~]# ip link (note ethernet name)
[root@localhost ~]# nano /etc/netctl/ethernet-dhcp
Description='DHCP connection'
Interface=enp0s3
Connection=ethernet
IP=dhcp
[root@localhost ~]# netctl start ethernet-dhcp
[root@localhost ~]# netctl enable ethernet-dhcp
[root@localhost ~]# pacman -S sudo
[root@localhost ~]# visudo (enable wheel group w/password save == esc :x)
[root@localhost ~]# useradd -m -G wheel -s /bin/bash h4x0r
[root@localhost ~]# passwd h4x0r (guest)
[root@localhost ~]# pacman -Syyu (sync databases)
</pre>

== Configure It ==
<pre>
# pacman -S openssh
# systemctl start sshd
# ststemctl enable sshd
# pacman -S xorg-xinit lxde
# echo "exec startlxde" > ~/.xinitrc
# startx

misc...
# pacman -S virtualbox python mosquitto zip tigervnc xorg firefox chromium
libgl (1?)
virtualbox (2)
libx264 (1)
ttf-font (1)

# pacman -S noto-fonts-cjk noto-fonts-emoji
# pacman -S fossil git svn

</pre>

Arch

2016-11-10T18:38:16Z

C0DE: minml setup cmd's mousepad-aqua

Arch is awesome you should try it, here's how...

== Try It ==

Download it: https://www.archlinux.org/download/ try teh torrent, it's hella well seeded.

Boot from iso, either on compatible hardware, or as a VirtualBox.

Congratulations, you're now running Arch.

== Install It ==

https://wiki.archlinux.org/index.php/Installation_Guide

#010 now it be green ?

I'm a repliCAN!

as in i can & will replicate

"when in doubt, reboot"

file got owned by root, chown it back

started vm with archlinux iso as optical

boot into Arch x64

<pre>
root@archiso ~ # timedatectl set-ntp true
root@archiso ~ # fdisk /dev/sda
n (use all defaults)
a (toggle bootable flag to enabled)
w (writes changes and exits
root@archis ~ # mkfs.ext4 /dev/sda1
root@archis ~ # mount /dev/sda1 /mnt
root@archis ~ # pacstrap /mnt base
root@archis ~ # genfstab -U /mnt >> /mnt/etc/fstab
root@archis ~ # arch-chroot /mnt

chroot # ln -s /usr/share/zoneinfo/America/Los_Angeles /etc/localtime
chroot # hwclock --systohc
chroot # nano /etc/locale.gen (uncomment en_US.UTF-8 and ISO)
chroot # locale-gen
chroot # echo LANG=en_US.UTF-8 > /etc/locale.conf
chroot # echo mousepad-aqua > /etc/hostname
chroot # passwd
aqua
chroot # pacman -S grub
chroot # grub-install --target=i386-pc /dev/sda
chroot # grub-mkconfig -o /boot/grub/grub.cfg
chroot # pacman -S intel-ucode
chroot # grub-mkconfig -o /boot/grub/grub.cfg
chroot # exit

[remove install media]

root@archis ~ # reboot

login as root

[root@localhost ~]# ip link (note ethernet name)
[root@localhost ~]# nano /etc/netctl/ethernet-dhcp
Description='DHCP connection'
Interface=enp0s3
Connection=ethernet
IP=dhcp
[root@localhost ~]# netctl start ethernet-dhcp
[root@localhost ~]# netctl enable ethernet-dhcp
[root@localhost ~]# pacman -S sudo
[root@localhost ~]# visudo (enable wheel group w/password save == esc :x)
[root@localhost ~]# useradd -m -G wheel -s /bin/bash h4x0r
[root@localhost ~]# passwd h4x0r (guest)
[root@localhost ~]# pacman -Syyu (sync databases)
</pre>

== Configure It ==
<pre>
# pacman -S openssh virtualbox python mosquitto zip tigervnc xorg firefox chromium
xorg (all)
libgl (1?)
virtualbox (2)
libx264 (1)
ttf-font (1)

# pacman -S noto-fonts-cjk noto-fonts-emoji
# pacman -S fossil git svn

systemctl start sshd
ststemctl enable sshd

pacman -S xorg-xinit lxde

nano ~/.xinitrc
exec startlxde
</pre>

Arch

2016-11-10T17:52:21Z

C0DE: ☁#0E0

Talk:Noisebridge

2016-11-09T22:41:31Z

C0DE: Undo revision 54827 by 109.163.234.4 (talk) #0E0

== How a'boot some 5MoF? ==

Can a section be added to the front page that shows active projects and new wiki entries being developed? Perhaps based on a category tag?

== <h2>New stuffs</h2> ==
*Make circuit boards [[PCB_Etching_Tutorial]]
*DefCon group [[DC415]]
*Router hacking [[WRT]]
*Basic use of [[NTP]]
*Flexible etching
**http://www.insulectro.com/content_media/file/Dupont_FRclad_H-73233.pdf
**https://www.noisebridge.net/pipermail/noisebridge-discuss/2016-August/048114.html
**http://imgur.com/gallery/TbzsP
**https://www.adafruit.com/products/1894
**http://www.ebay.com/sch/items/?_nkw=pyralux&_sacat=&_ex_kw=&_mPrRngCbx=1&_udlo=&_udhi=&_sop=12&_fpos=&_fspt=1&_sadis=&LH_CAds=&rmvSB=true
*Kali linux (live usb)
**http://docs.kali.org/downloading/kali-linux-live-usb-install
**http://docs.kali.org/downloading/kali-linux-live-usb-persistence

[[User:H4X0R|空]] ([[User talk:H4X0R|talk]]) 18:10, 8 September 2016 (UTC)

[[User:H4X0R|空]] ([[User talk:H4X0R|talk]]) 02:19, 3 October 2016 (UTC)

[[User:Thex|thex]] ([[User talk:Thex|talk]]) 17:03, 11 October 2016 (UTC)

<center>☐</center>

[[User:C0DE|C0DE]] ([[User talk:C0DE|talk]]) 22:41, 9 November 2016 (UTC)

ESP32

2016-11-08T22:19:11Z

C0DE: #E70 thx to sprite_TM!

[[File:ESP-WROOM-32.JPG|800px]]

File:ESP-WROOM-32.JPG

2016-11-08T22:14:18Z

C0DE: SD Card for scale #E70

SD Card for scale #E70

SUPERCON

2016-11-06T01:16:28Z

C0DE: /* badge h4x0r'n */ quick start

noisebridge.net/SUPERCON
 
hackaday
 
샞
 

[EXPERIMENTAL]
 
If you are on-site at supercon and connected to WiFi or ethernet you can hit teh following
 
<s>http://192.168.7.35</s>
 
<s>http://192.168.7.35:9999/index</s>

 

== badge h4x0r'n ==
pro tip, hold teh left and right buttons, and press up/down buttons to adjust LED brightness

=== firmware ===

#Open the link: https://mplabxpress.microchip.com/mplabcloud/Example/Details/259#
#Write some code
#Press the button with a down arrow and chip icon "Make and Program Device", this will build the new firmware and download a .hex file.
#Connect your badge with a USB cable
#Hold down teh "ON" button, press the "RESET" button, release the "ON" button
#Copy the .hex file to the badge, which shows up like a usb stick
#Unplug the USB cable
#Play with your new version of firmware

=== crypto.hac.io ===
Hints, of a sort, include Mastermind, Morse, electronics, history, and geography, and more.

==== 1 ====
'''Mastermind Challenge'''

think binary eh?

==== 2 ====
'''Morse Code Challenge'''

.... --- .-- -- .- -. -.-- -... .. - ... .. -. .- --. .. --. .- -... -.-- - .

HOW MANY BITS IN A GIGABYTE

There's an app for that "Morse Encoder Decoder" by Tsai Chieh-Ping

==== 3 ====
'''GO as in GO Game? Challenge'''

==== 4 ====
'''? Challenge'''

==== 5 ====
'''? Challenge'''

0x34A5B2
<=herring=x
 
*https://hackaday.com/2016/11/03/the-hacks-and-puzzles-of-the-hackaday-supercon-badge/#more-229804
*http://hackaday.com/2016/11/04/the-fastest-path-to-supercon-badge-firmware-hacking/
*https://hackaday.io/project/17953-superconference-challenge
*https://en.wikipedia.org/wiki/Mastermind_(board_game)
*https://en.wikipedia.org/wiki/Morse_code
*https://www.microchip.com/mplab/mplab-xpress

== mousepad ==
Hackerspace in a vbox

ask a h4x0r for mousepad-cyan, please have a usb stick or SD card with a few gig's free.

== nubcore ==
Temperature/Humidity 
[[File:nubDHT.jpg|800px]]
 
 
Volts
 
[[File:nubVolt.jpg|800px]]
 
Concept Development
 
[[File:NubVoltRender.jpg|800px]]

== more ==
add things here...

SUPERCON

2016-11-06T00:18:15Z

C0DE: /* badge h4x0r'n */ dimmer

noisebridge.net/SUPERCON
 
hackaday
 
샞
 

[EXPERIMENTAL]
 
If you are on-site at supercon and connected to WiFi or ethernet you can hit teh following
 
<s>http://192.168.7.35</s>
 
<s>http://192.168.7.35:9999/index</s>

 

== badge h4x0r'n ==
pro tip, with the demo firmware, hold teh left and right buttons, and press up/down buttons to adjust LED brightness

=== crypto.hac.io ===
Hints, of a sort, include Mastermind, Morse, electronics, history, and geography, and more.

==== 1 ====
'''Mastermind Challenge'''

think binary eh?

==== 2 ====
'''Morse Code Challenge'''

.... --- .-- -- .- -. -.-- -... .. - ... .. -. .- --. .. --. .- -... -.-- - .

HOW MANY BITS IN A GIGABYTE

There's an app for that "Morse Encoder Decoder" by Tsai Chieh-Ping

==== 3 ====
'''GO as in GO Game? Challenge'''

==== 4 ====
'''? Challenge'''

==== 5 ====
'''? Challenge'''

0x34A5B2
<=herring=x
 
*https://hackaday.com/2016/11/03/the-hacks-and-puzzles-of-the-hackaday-supercon-badge/#more-229804
*http://hackaday.com/2016/11/04/the-fastest-path-to-supercon-badge-firmware-hacking/
*https://hackaday.io/project/17953-superconference-challenge
*https://en.wikipedia.org/wiki/Mastermind_(board_game)
*https://en.wikipedia.org/wiki/Morse_code
*https://www.microchip.com/mplab/mplab-xpress

== mousepad ==
Hackerspace in a vbox

ask a h4x0r for mousepad-cyan, please have a usb stick or SD card with a few gig's free.

== nubcore ==
Temperature/Humidity 
[[File:nubDHT.jpg|800px]]
 
 
Volts
 
[[File:nubVolt.jpg|800px]]
 
Concept Development
 
[[File:NubVoltRender.jpg|800px]]

== more ==
add things here...

SUPERCON

2016-11-06T00:17:20Z

C0DE: /* 2 */

noisebridge.net/SUPERCON
 
hackaday
 
샞
 

[EXPERIMENTAL]
 
If you are on-site at supercon and connected to WiFi or ethernet you can hit teh following
 
<s>http://192.168.7.35</s>
 
<s>http://192.168.7.35:9999/index</s>

 

== badge h4x0r'n ==
=== crypto.hac.io ===
Hints, of a sort, include Mastermind, Morse, electronics, history, and geography, and more.

==== 1 ====
'''Mastermind Challenge'''

think binary eh?

==== 2 ====
'''Morse Code Challenge'''

.... --- .-- -- .- -. -.-- -... .. - ... .. -. .- --. .. --. .- -... -.-- - .

HOW MANY BITS IN A GIGABYTE

There's an app for that "Morse Encoder Decoder" by Tsai Chieh-Ping

==== 3 ====
'''GO as in GO Game? Challenge'''

==== 4 ====
'''? Challenge'''

==== 5 ====
'''? Challenge'''

0x34A5B2
<=herring=x
 
*https://hackaday.com/2016/11/03/the-hacks-and-puzzles-of-the-hackaday-supercon-badge/#more-229804
*http://hackaday.com/2016/11/04/the-fastest-path-to-supercon-badge-firmware-hacking/
*https://hackaday.io/project/17953-superconference-challenge
*https://en.wikipedia.org/wiki/Mastermind_(board_game)
*https://en.wikipedia.org/wiki/Morse_code
*https://www.microchip.com/mplab/mplab-xpress

== mousepad ==
Hackerspace in a vbox

ask a h4x0r for mousepad-cyan, please have a usb stick or SD card with a few gig's free.

== nubcore ==
Temperature/Humidity 
[[File:nubDHT.jpg|800px]]
 
 
Volts
 
[[File:nubVolt.jpg|800px]]
 
Concept Development
 
[[File:NubVoltRender.jpg|800px]]

== more ==
add things here...

SUPERCON

2016-11-06T00:05:47Z

C0DE: /* crypto.hac.io */

noisebridge.net/SUPERCON
 
hackaday
 
샞
 

[EXPERIMENTAL]
 
If you are on-site at supercon and connected to WiFi or ethernet you can hit teh following
 
<s>http://192.168.7.35</s>
 
<s>http://192.168.7.35:9999/index</s>

 

== badge h4x0r'n ==
=== crypto.hac.io ===
Hints, of a sort, include Mastermind, Morse, electronics, history, and geography, and more.

==== 1 ====
'''Mastermind Challenge'''

think binary eh?

==== 2 ====
'''Morse Code Challenge'''

.... --- .-- -- .- -. -.-- -... .. - ... .. -. .- --. .. --. .- -... -.-- - .

HOW MANY BITS IN A GIGABYTE

==== 3 ====
'''GO as in GO Game? Challenge'''

==== 4 ====
'''? Challenge'''

==== 5 ====
'''? Challenge'''

0x34A5B2
<=herring=x
 
*https://hackaday.com/2016/11/03/the-hacks-and-puzzles-of-the-hackaday-supercon-badge/#more-229804
*http://hackaday.com/2016/11/04/the-fastest-path-to-supercon-badge-firmware-hacking/
*https://hackaday.io/project/17953-superconference-challenge
*https://en.wikipedia.org/wiki/Mastermind_(board_game)
*https://en.wikipedia.org/wiki/Morse_code
*https://www.microchip.com/mplab/mplab-xpress

== mousepad ==
Hackerspace in a vbox

ask a h4x0r for mousepad-cyan, please have a usb stick or SD card with a few gig's free.

== nubcore ==
Temperature/Humidity 
[[File:nubDHT.jpg|800px]]
 
 
Volts
 
[[File:nubVolt.jpg|800px]]
 
Concept Development
 
[[File:NubVoltRender.jpg|800px]]

== more ==
add things here...

SUPERCON

2016-11-06T00:03:47Z

C0DE: /* 3 */

noisebridge.net/SUPERCON
 
hackaday
 
샞
 

[EXPERIMENTAL]
 
If you are on-site at supercon and connected to WiFi or ethernet you can hit teh following
 
<s>http://192.168.7.35</s>
 
<s>http://192.168.7.35:9999/index</s>

 

== badge h4x0r'n ==
=== crypto.hac.io ===
Hints, of a sort, include Mastermind, Morse, electronics, history, and geography, and more.

==== 1 ====
Morse Code Challenge

==== 2 ====
Mastermind Challenge

==== 3 ====
GO as in GO Game? Challenge

==== 4 ====
? Challenge

==== 5 ====
? Challenge

0x34A5B2
<=herring=x
 
*https://hackaday.com/2016/11/03/the-hacks-and-puzzles-of-the-hackaday-supercon-badge/#more-229804
*http://hackaday.com/2016/11/04/the-fastest-path-to-supercon-badge-firmware-hacking/
*https://hackaday.io/project/17953-superconference-challenge
*https://en.wikipedia.org/wiki/Mastermind_(board_game)
*https://en.wikipedia.org/wiki/Morse_code
*https://www.microchip.com/mplab/mplab-xpress

== mousepad ==
Hackerspace in a vbox

ask a h4x0r for mousepad-cyan, please have a usb stick or SD card with a few gig's free.

== nubcore ==
Temperature/Humidity 
[[File:nubDHT.jpg|800px]]
 
 
Volts
 
[[File:nubVolt.jpg|800px]]
 
Concept Development
 
[[File:NubVoltRender.jpg|800px]]

== more ==
add things here...

SUPERCON

2016-11-06T00:03:14Z

C0DE: /* crypto.hac.io */

SUPERCON

2016-11-05T23:31:20Z

C0DE: re-arrange

SUPERCON

2016-11-05T23:29:28Z

C0DE: /* badge h4x0r'n */

SUPERCON

2016-11-05T22:27:00Z

C0DE: experimental links

SUPERCON

2016-11-05T22:11:40Z

C0DE:

File:NubVoltRender.jpg

2016-11-05T22:09:56Z

C0DE:

SUPERCON

2016-11-05T22:07:38Z

C0DE: pics

File:NubVolt.jpg

2016-11-05T22:00:14Z

C0DE: nubcore volt meter

nubcore volt meter

File:NubDHT.jpg

2016-11-05T21:59:38Z

C0DE: C0DE uploaded a new version of "File:NubDHT.jpg": nubcore with DHT11 temperature humidity sensor

File:NubDHT.jpg

2016-11-05T21:56:55Z

C0DE:

SUPERCON

2016-11-05T21:44:02Z

C0DE:

hackaday
 
샞
 

Noisebridge.net/SUPERCON

 
== badge h4x0r'n ==
 
0x34A5B2
<=herring=x
 
*https://hackaday.com/2016/11/03/the-hacks-and-puzzles-of-the-hackaday-supercon-badge/#more-229804
*http://hackaday.com/2016/11/04/the-fastest-path-to-supercon-badge-firmware-hacking/
*https://hackaday.io/project/17953-superconference-challenge
*https://en.wikipedia.org/wiki/Mastermind_(board_game)
*https://en.wikipedia.org/wiki/Morse_code
*https://www.microchip.com/mplab/mplab-xpress

== nubcore ==
esp8266 stuff coming shortly

== mousepad ==
Hackerspace in a vbox

SUPERCON

2016-11-05T21:36:31Z

C0DE: nub

hackaday
 
샞
 
== badge h4x0r'n ==
 
0x34A5B2
<=herring=x
 
*https://hackaday.com/2016/11/03/the-hacks-and-puzzles-of-the-hackaday-supercon-badge/#more-229804
*http://hackaday.com/2016/11/04/the-fastest-path-to-supercon-badge-firmware-hacking/
*https://hackaday.io/project/17953-superconference-challenge
*https://en.wikipedia.org/wiki/Mastermind_(board_game)
*https://en.wikipedia.org/wiki/Morse_code
*https://www.microchip.com/mplab/mplab-xpress

== nubcore ==
esp8266 stuff coming shortly

== mousepad ==
Hackerspace in a vbox

Supercon

2016-11-05T20:10:47Z

C0DE: C0DE moved page Supercon to SUPERCON over redirect: 샞

#REDIRECT [[SUPERCON]]

SUPERCON

2016-11-05T20:10:47Z

C0DE: C0DE moved page Supercon to SUPERCON over redirect: 샞

hackaday
 
샞
 
== badge h4x0r'n ==
 
0x34A5B2
 
*https://hackaday.com/2016/11/03/the-hacks-and-puzzles-of-the-hackaday-supercon-badge/#more-229804
*http://hackaday.com/2016/11/04/the-fastest-path-to-supercon-badge-firmware-hacking/
*https://hackaday.io/project/17953-superconference-challenge
*https://en.wikipedia.org/wiki/Mastermind_(board_game)
*https://en.wikipedia.org/wiki/Morse_code
*https://www.microchip.com/mplab/mplab-xpress

SUPERCON

2016-11-05T20:10:29Z

C0DE: C0DE moved page SUPERCON to Supercon: case sensitivity h4x

hackaday
 
샞
 
== badge h4x0r'n ==
 
0x34A5B2
 
*https://hackaday.com/2016/11/03/the-hacks-and-puzzles-of-the-hackaday-supercon-badge/#more-229804
*http://hackaday.com/2016/11/04/the-fastest-path-to-supercon-badge-firmware-hacking/
*https://hackaday.io/project/17953-superconference-challenge
*https://en.wikipedia.org/wiki/Mastermind_(board_game)
*https://en.wikipedia.org/wiki/Morse_code
*https://www.microchip.com/mplab/mplab-xpress

SUPERCON

2016-11-05T20:00:02Z

C0DE: badge hack'n

hackaday
 
샞
 
== badge h4x0r'n ==
 
0x34A5B2
 
*https://hackaday.com/2016/11/03/the-hacks-and-puzzles-of-the-hackaday-supercon-badge/#more-229804
*http://hackaday.com/2016/11/04/the-fastest-path-to-supercon-badge-firmware-hacking/
*https://hackaday.io/project/17953-superconference-challenge
*https://en.wikipedia.org/wiki/Mastermind_(board_game)
*https://en.wikipedia.org/wiki/Morse_code
*https://www.microchip.com/mplab/mplab-xpress

SUPERCON

2016-11-05T19:57:17Z

C0DE:

hackaday supercon
 
샞

*https://hackaday.com/2016/11/03/the-hacks-and-puzzles-of-the-hackaday-supercon-badge/#more-229804
*http://hackaday.com/2016/11/04/the-fastest-path-to-supercon-badge-firmware-hacking/
*https://hackaday.io/project/17953-superconference-challenge
*https://en.wikipedia.org/wiki/Mastermind_(board_game)
*https://en.wikipedia.org/wiki/Morse_code

SUPERCON

2016-11-05T19:56:35Z

C0DE: supercon 샞 #F0F

hackaday supercon

*https://hackaday.com/2016/11/03/the-hacks-and-puzzles-of-the-hackaday-supercon-badge/#more-229804
*http://hackaday.com/2016/11/04/the-fastest-path-to-supercon-badge-firmware-hacking/
*https://hackaday.io/project/17953-superconference-challenge
*https://en.wikipedia.org/wiki/Mastermind_(board_game)
*https://en.wikipedia.org/wiki/Morse_code

User:C0DE

2016-11-05T19:54:17Z

C0DE: supercon

샞
[[SUPERCON]]

User:C0DE

2016-11-05T19:52:15Z

C0DE:

샞

User:C0DE

2016-11-05T19:52:04Z

C0DE: #F0F

샞

User:C0DE

2016-11-05T19:51:46Z

C0DE: Created page with " 샞"

샞